12 KV LBSF Feeder Pillar Type Panel in Jalgaon

  1. Home
  2. Locations We Serve
  3. LBSF Feeder Pillar Panel in Jalgaon

EL-Tech Controls manufactures and supplies the LBSF Feeder Pillar Panel in Jalgaon for distribution transformer centres, HT consumers, industrial plants, townships, hospitals and commercial buildings. Every panel is built at our Ambad MIDC, Nashik works, where we have made MV switchgear since 1995.

MSEDCL ApprovedPWD & MES ApprovedType Tested at ERDA, BarodaManufacturing Since 1995Delivery Across Jalgaon

Request a Quote for Jalgaon

LBSF Feeder Pillar Panel for Jalgaon's Power Distribution

Jalgaon is a leading agro-industrial district of North Maharashtra, known for plastics, irrigation equipment, food processing and banana-based industries. For sites with several transformers, this saves a large amount of 11 KV cable and trenching while keeping each transformer individually protected.

Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda, so they are accepted for new HT connections and transformer centres under MSEDCL in Jalgaon. Each panel is built to suit the transformer rating and site layout, for indoor or outdoor use.

Product Details

The feeder pillar type is a step toward major cost savings without any technical changes. A provision for outgoing XLPE cables is made in the I/C box, so a single incoming XLPE cable can connect multiple transformers instead of laying a separate cable for each.

Material and Construction

  • Frame made of heavy steel sheet that protects all mechanical parts from dust, insects and rain.
  • Simple, compact and tested construction that does not age or deteriorate during long periods of inactivity.
  • Epoxy resin supporting insulators that withstand the electrodynamic stresses guaranteed by the switch.
  • 100% non-porous powder coating with provision for cable entry.

Safety Mechanisms

  • Independent quick break and make operating mechanism, with springs always in the 'off' position.
  • Load break switch with fully interlocked earthing blades.
  • Interlock between LBS and door: the door cannot open while the LBS is engaged.
  • Interlock between front door and LBS: the LBS cannot be engaged while the front door is open.
  • Interlock between LBS and earth switch: the earth switch disconnects first, and only then does the LBS engage.
  • Blowing of a single HRC fuse trips the LBS immediately to prevent single phasing.

Performance

  • The arc is extinguished quickly by self-generated air through three piston cylinders, one per pole, mounted in axis with the insulators.
  • The volume of blown air and the contact separation speed ensure reliable switching even in harsh conditions.

Technical Overview

ParameterDetails
Rated voltage12 KV (for 11 KV distribution systems)
Switching device400A / 630A Load Break Switch with D.O. set / HRC fuse and earth switch
Cable arrangementOutgoing XLPE cable provision in the I/C box
InsulatorsEpoxy resin
EnclosureHeavy steel sheet, powder coated, indoor / outdoor
ApprovalsMSEDCL C.E. Distribution, PWD C.E. Electricals, Garrison Engineers (MES)
Type testingERDA, Baroda

Advantages

  • One incoming cable for multiple transformers
  • Saves 11 KV XLPE cable and trenching
  • Individual protection for each transformer
  • Low maintenance cost
  • Unique and compact design
  • Elegant look
  • No overhead lines required
  • Electrically safe, fully enclosed cubicle
  • Easy and smooth operation
  • Safety interlocks allow semi-skilled operation

Suitable for townships, industries and hospitals where more than one transformer is required.

Choose the Right Panel for Your Jalgaon Site

Panel typeBest for
12 KV LBSF PanelReplacing existing or new DP structures at any transformer centre
LBSF Coupled TypeSpace-constrained sites, basements and congested city areas
Feeder Pillar TypeTownships, hospitals and industries with more than one transformer
Feeder Pillar + CoupledMalls, business centres, IT parks and multi-townships
LBS Isolator PanelIsolation-only requirements
One I/C & Multiple O/G2 to 3 transformers at one location; a single cable saves up to 40% cost
Compact Substation11 KV HT consumers needing LBSF and metering in one IP55 enclosure

Applications in Jalgaon

  • Plastic, PVC pipe and irrigation equipment units in Jalgaon MIDC
  • Food and banana processing plants
  • Railway and power sector installations around Bhusawal
  • Cold storages and warehouses
  • Hospitals and commercial complexes

Frequently Asked Questions

Do you supply the LBSF Feeder Pillar Panel in Jalgaon?

Yes. EL-Tech Controls manufactures the LBSF Feeder Pillar Panel at its Ambad MIDC, Nashik works and supplies it to sites across Jalgaon, including Jalgaon MIDC, Bhusawal, Jamner, Chalisgaon, Pachora and Amalner.

Are your panels approved for use in Jalgaon?

Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda, so they are accepted for new HT connections and transformer centres under MSEDCL in Jalgaon.

What is a LBSF Feeder Pillar Panel?

The feeder pillar type is a step toward major cost savings without any technical changes. A provision for outgoing XLPE cables is made in the I/C box, so a single incoming XLPE cable can connect multiple transformers instead of laying a separate cable for each.

When should I choose a feeder pillar type LBSF panel?

Choose it when one site has more than one transformer. One incoming XLPE cable can feed several transformers, which saves cable and installation cost.

Is the LBSF Feeder Pillar Panel suitable for high summer temperatures and dust in Jalgaon?

Yes. The fully enclosed heavy steel sheet body keeps out dust and insects, and the simple mechanism stays reliable through Jalgaon's hot, dusty summers.

How do I get a quotation for the LBSF Feeder Pillar Panel in Jalgaon?

Call +91 98220 21564, email response@eltechcontrols.com or fill in the enquiry form with your transformer rating, number of transformers and site location in Jalgaon.

Areas We Serve in Jalgaon

  • Jalgaon MIDC
  • Bhusawal
  • Jamner
  • Chalisgaon
  • Pachora
  • Amalner
  • Erandol
  • Yawal
  • Raver

Why EL-Tech Controls

  • Over two decades of LBSF panel manufacturing
  • Easy and smooth operation, no overhead lines
  • Fully enclosed, electrically safe cubicle
  • Safety interlocks allow semi-skilled operation
  • Less space and low maintenance cost
  • Direct manufacturer supply to Jalgaon

Contact for Jalgaon Enquiries

+91 98220 21564
+91 253 2383478 / 2380076
response@eltechcontrols.com
A-9/4/3, MIDC, Ambad, Nashik 422010

Need a LBSF Feeder Pillar Panel in Jalgaon?

Share your transformer rating, quantity and site location for a quick quotation.

Send Enquiry