EL-Tech Controls manufactures and supplies the Feeder Pillar + Coupled LBSF Panel in Ahmednagar for distribution transformer centres, HT consumers, industrial plants, townships, hospitals and commercial buildings. Every panel is built at our Ambad MIDC, Nashik works, where we have made MV switchgear since 1995.
Request a Quote for Ahmednagar
Feeder Pillar + Coupled LBSF Panel for Ahmednagar's Power Distribution
Ahilyanagar (Ahmednagar) is Maharashtra's largest district by area, with industry in Nagar and Supa MIDC and a strong base of sugar factories, dairies and agro-processing units. Each transformer is coupled directly through a bus duct while one incoming cable serves the whole group, so large sites save cable, jointing kits and land at the same time.
Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda, so they are accepted for new HT connections and transformer centres under MSEDCL in Ahmednagar. Each panel is built to suit the transformer rating and site layout, for indoor or outdoor use.
Product Details
The feeder pillar + coupled type is the advanced version of the M.V. LBSF panel. It combines the advantages of the coupled and feeder pillar types, giving maximum space utilisation at multi-transformer distribution centres.
Material and Construction
- Frame made of heavy steel sheet that protects all mechanical parts from dust, insects and rain.
- Simple, compact and tested construction that does not age or deteriorate during long periods of inactivity.
- Epoxy resin supporting insulators that withstand the electrodynamic stresses guaranteed by the switch.
- 100% non-porous powder coating with provision for cable entry.
Safety Mechanisms
- Independent quick break and make operating mechanism, with springs always in the 'off' position.
- Load break switch with fully interlocked earthing blades.
- Interlock between LBS and door: the door cannot open while the LBS is engaged.
- Interlock between front door and LBS: the LBS cannot be engaged while the front door is open.
- Interlock between LBS and earth switch: the earth switch disconnects first, and only then does the LBS engage.
- Blowing of a single HRC fuse trips the LBS immediately to prevent single phasing.
Performance
- The arc is extinguished quickly by self-generated air through three piston cylinders, one per pole, mounted in axis with the insulators.
- The volume of blown air and the contact separation speed ensure reliable switching even in harsh conditions.
Technical Overview
| Parameter | Details |
|---|---|
| Rated voltage | 12 KV (for 11 KV distribution systems) |
| Switching device | 400A / 630A Load Break Switch with D.O. set / HRC fuse and earth switch |
| Configuration | Feeder pillar I/C with bus-duct coupling to each transformer |
| Insulators | Epoxy resin |
| Enclosure | Heavy steel sheet, powder coated, indoor / outdoor |
| Approvals | MSEDCL C.E. Distribution, PWD C.E. Electricals, Garrison Engineers (MES) |
| Type testing | ERDA, Baroda |
Advantages
- Space saving
- Compact design
- Maintenance free
- Reduces 11 KV XLPE cable
- Reduces the number of 11 KV jointing kits
- Cost saving
- Unique and compact design
- Elegant look
- Low maintenance cost
- No overhead lines required
- Electrically safe, fully enclosed cubicle
- Easy and smooth operation
- Safety interlocks allow semi-skilled operation
Suitable for malls, business centres, industrial complexes and multi-townships.
Choose the Right Panel for Your Ahmednagar Site
| Panel type | Best for |
|---|---|
| 12 KV LBSF Panel | Replacing existing or new DP structures at any transformer centre |
| LBSF Coupled Type | Space-constrained sites, basements and congested city areas |
| Feeder Pillar Type | Townships, hospitals and industries with more than one transformer |
| Feeder Pillar + Coupled | Malls, business centres, IT parks and multi-townships |
| LBS Isolator Panel | Isolation-only requirements |
| One I/C & Multiple O/G | 2 to 3 transformers at one location; a single cable saves up to 40% cost |
| Compact Substation | 11 KV HT consumers needing LBSF and metering in one IP55 enclosure |
Applications in Ahmednagar
- Engineering and auto component units in Nagar and Supa MIDC
- Sugar factories and distilleries
- Dairy and agro-processing plants
- Hotels, hospitals and pilgrimage facilities around Shirdi
- Retail and commercial complexes
Our Installations in Ahmednagar
Some of the sites in Ahmednagar where EL-Tech Controls panels are installed:
- Big Bazaar, Ahmednagar
Frequently Asked Questions
Do you supply the Feeder Pillar + Coupled LBSF Panel in Ahmednagar?
Yes. EL-Tech Controls manufactures the Feeder Pillar + Coupled LBSF Panel at its Ambad MIDC, Nashik works and supplies it to sites across Ahmednagar, including Nagar MIDC, Supa MIDC, Shrirampur, Sangamner, Rahuri and Shirdi.
Are your panels approved for use in Ahmednagar?
Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda, so they are accepted for new HT connections and transformer centres under MSEDCL in Ahmednagar.
What is a Feeder Pillar + Coupled LBSF Panel?
The feeder pillar + coupled type is the advanced version of the M.V. LBSF panel. It combines the advantages of the coupled and feeder pillar types, giving maximum space utilisation at multi-transformer distribution centres.
How is the feeder pillar + coupled type different from the feeder pillar type?
Both use one incoming cable for several transformers, but in the feeder pillar + coupled type each panel is also bus-duct coupled to its transformer, saving more cable, joints and land.
Is the Feeder Pillar + Coupled LBSF Panel suitable for high summer temperatures and dust in Ahmednagar?
Yes. The fully enclosed heavy steel sheet body keeps out dust and insects, and the simple mechanism stays reliable through Ahmednagar's hot, dusty summers.
How do I get a quotation for the Feeder Pillar + Coupled LBSF Panel in Ahmednagar?
Call +91 98220 21564, email response@eltechcontrols.com or fill in the enquiry form with your transformer rating, number of transformers and site location in Ahmednagar.
Areas We Serve in Ahmednagar
- Nagar MIDC
- Supa MIDC
- Shrirampur
- Sangamner
- Rahuri
- Shirdi
- Kopargaon
- Rahata
- Shevgaon
- Karjat
Why EL-Tech Controls
- Over two decades of LBSF panel manufacturing
- Easy and smooth operation, no overhead lines
- Fully enclosed, electrically safe cubicle
- Safety interlocks allow semi-skilled operation
- Less space and low maintenance cost
- Direct manufacturer supply to Ahmednagar
Contact for Ahmednagar Enquiries
+91 98220 21564
+91 253 2383478 / 2380076
response@eltechcontrols.com
A-9/4/3, MIDC, Ambad, Nashik 422010
Need a Feeder Pillar + Coupled LBSF Panel in Ahmednagar?
Share your transformer rating, quantity and site location for a quick quotation.
Send EnquiryOther Products in Ahmednagar
- 12 KV LBSF Panel in Ahmednagar
- LBSF Coupled Type in Ahmednagar
- Feeder Pillar Type in Ahmednagar
- LBS Isolator Panel in Ahmednagar
- One I/C & Multiple O/G in Ahmednagar
- Compact Substation in Ahmednagar
- Panel Cleaning Solutions in Ahmednagar
Feeder Pillar + Coupled LBSF Panel in Nearby Cities
See full product details on our 12 KV LBSF Panel - Feeder Pillar + Coupled Type page, or view all locations we serve.