EL-Tech Controls manufactures and supplies the LBSF Coupled Type Panel in Chennai for distribution transformer centres, HT consumers, industrial plants, townships, hospitals and commercial buildings. Every panel is built at our Ambad MIDC, Nashik works, where we have made MV switchgear since 1995.
LBSF Coupled Type Panel for Chennai's Power Distribution
Chennai is India's automobile and electronics manufacturing hub, with large plants at Sriperumbudur, Oragadam and Irungattukottai and an expanding IT corridor along OMR. Because the panel sits directly against the transformer, it removes the 11 KV cable run between them, which is a real advantage on tight plots, basements and congested city areas.
In Chennai, power is distributed by TNPDCL (formerly TANGEDCO). Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda. Share your utility or consultant specification and we will confirm compliance before manufacturing. Each panel is built to suit the transformer rating and site layout, for indoor or outdoor use.
Product Details
The coupled LBSF is an upgraded version of the LBSF panel for places with space constraints. The panel is coupled to a compatible transformer through a fabricated bus duct with sleeved copper bus bars, connected directly to the H.V. side bushing of the transformer. Special care is taken to avoid oil leakage at the bushing.
Material and Construction
- Frame made of heavy steel sheet that protects all mechanical parts from dust, insects and rain.
- Simple, compact and tested construction that does not age or deteriorate during long periods of inactivity.
- Epoxy resin supporting insulators that withstand the electrodynamic stresses guaranteed by the switch.
- 100% non-porous powder coating with provision for cable entry.
Safety Mechanisms
- Independent quick break and make operating mechanism, with springs always in the 'off' position.
- Load break switch with fully interlocked earthing blades.
- Interlock between LBS and door: the door cannot open while the LBS is engaged.
- Interlock between front door and LBS: the LBS cannot be engaged while the front door is open.
- Interlock between LBS and earth switch: the earth switch disconnects first, and only then does the LBS engage.
- Blowing of a single HRC fuse trips the LBS immediately to prevent single phasing.
Performance
- The arc is extinguished quickly by self-generated air through three piston cylinders, one per pole, mounted in axis with the insulators.
- The volume of blown air and the contact separation speed ensure reliable switching even in harsh conditions.
Technical Overview
| Parameter | Details |
|---|---|
| Rated voltage | 12 KV (for 11 KV distribution systems) |
| Switching device | 400A / 630A Load Break Switch with D.O. set / HRC fuse and earth switch |
| Transformer connection | Fabricated bus duct with sleeved copper bus bars to the H.V. bushing |
| Insulators | Epoxy resin |
| Enclosure | Heavy steel sheet, powder coated, indoor / outdoor |
| Approvals | MSEDCL C.E. Distribution, PWD C.E. Electricals, Garrison Engineers (MES) |
| Type testing | ERDA, Baroda |
Advantages
- Reduces 11 KV XLPE cable
- Reduces the number of 11 KV jointing kits
- Low maintenance cost
- Uses minimum land area
- Unique and compact design
- Elegant look
- No overhead lines required
- Electrically safe, fully enclosed cubicle
- Easy and smooth operation
- Safety interlocks allow semi-skilled operation
Suitable for industry, apartments, malls and congested areas in a city.
Choose the Right Panel for Your Chennai Site
| Panel type | Best for |
|---|---|
| 12 KV LBSF Panel | Replacing existing or new DP structures at any transformer centre |
| LBSF Coupled Type | Space-constrained sites, basements and congested city areas |
| Feeder Pillar Type | Townships, hospitals and industries with more than one transformer |
| Feeder Pillar + Coupled | Malls, business centres, IT parks and multi-townships |
| LBS Isolator Panel | Isolation-only requirements |
| One I/C & Multiple O/G | 2 to 3 transformers at one location; a single cable saves up to 40% cost |
| Compact Substation | 11 KV HT consumers needing LBSF and metering in one IP55 enclosure |
Applications in Chennai
- Automobile and electronics plants in Sriperumbudur and Oragadam
- Engineering units in Ambattur and Guindy
- IT parks along OMR and Siruseri
- Warehousing and logistics parks
- Hospitals, malls and residential complexes
Frequently Asked Questions
Do you supply the LBSF Coupled Type Panel in Chennai?
Yes. EL-Tech Controls manufactures the LBSF Coupled Type Panel at its Ambad MIDC, Nashik works and supplies it to sites across Chennai, including Sriperumbudur, Oragadam, Ambattur, Guindy, Irungattukottai and Gummidipoondi.
Are your panels approved for use in Chennai?
In Chennai, power is distributed by TNPDCL (formerly TANGEDCO). Our panels are approved by MSEDCL (C.E. Distribution), PWD (C.E. Electricals) and Garrison Engineers (MES), and are type-tested at ERDA, Baroda. Share your utility or consultant specification and we will confirm compliance before manufacturing.
What is a LBSF Coupled Type Panel?
The coupled LBSF is an upgraded version of the LBSF panel for places with space constraints. The panel is coupled to a compatible transformer through a fabricated bus duct with sleeved copper bus bars, connected directly to the H.V. side bushing of the transformer. Special care is taken to avoid oil leakage at the bushing.
What is the advantage of a coupled type LBSF panel?
It connects directly to the transformer through a bus duct, so you save 11 KV XLPE cable and jointing kits, use less land and reduce maintenance.
Is the LBSF Coupled Type Panel suitable for humid, salt-laden coastal air in Chennai?
Yes. The fully enclosed heavy steel sheet body and powder coating protect the mechanism from rain, dust and the humid coastal air of Chennai.
How do I get a quotation for the LBSF Coupled Type Panel in Chennai?
Call +91 98220 21564, email response@eltechcontrols.com or fill in the enquiry form with your transformer rating, number of transformers and site location in Chennai.
Areas We Serve in Chennai
- Sriperumbudur
- Oragadam
- Ambattur
- Guindy
- Irungattukottai
- Gummidipoondi
- Maraimalai Nagar
- Siruseri
- OMR
- Thiruvallur
- Ennore
Why EL-Tech Controls
- Over two decades of LBSF panel manufacturing
- Easy and smooth operation, no overhead lines
- Fully enclosed, electrically safe cubicle
- Safety interlocks allow semi-skilled operation
- Less space and low maintenance cost
- Direct manufacturer supply to Chennai
Contact for Chennai Enquiries
+91 98220 21564
+91 253 2383478 / 2380076
response@eltechcontrols.com
A-9/4/3, MIDC, Ambad, Nashik 422010
Need a LBSF Coupled Type Panel in Chennai?
Share your transformer rating, quantity and site location for a quick quotation.
Send EnquiryOther Products in Chennai
- 12 KV LBSF Panel in Chennai
- Feeder Pillar Type in Chennai
- Feeder Pillar + Coupled in Chennai
- LBS Isolator Panel in Chennai
- One I/C & Multiple O/G in Chennai
- Compact Substation in Chennai
- Panel Cleaning Solutions in Chennai
LBSF Coupled Type Panel in Nearby Cities
See full product details on our 12 KV LBSF Panel - Coupled Type page, or view all locations we serve.